03-15-2025, 12:43 PM
Portable balancer & Vibration analyzer Balanset-1A
Description:
![[Image: 77-e1693745667801.jpg.webp]](https://vibromera.eu/wp-content/uploads/2023/09/77-e1693745667801.jpg.webp)
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Description of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel tool created for balancing and vibration analysis of rotating machinery. It excels in balancing rotors such as crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and more.
Main Functions and Features
Vibration Measurement Mode
Tachometer: Exact measurement of rotational speed (RPM).
Phase: Identifies the phase angle of vibration signals for accurate analysis.
1x Vibration: Analyzes and measures the primary frequency component.
FFT Spectrum: Thorough analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitors overall vibration levels.
Measurement Log: Keeps a record of data for further analysis.
Balance Mode
Single-Plane Balancing: Adjusts rotors in a single plane to reduce vibration.
Two-Plane Balancing: Dynamic adjustment of rotors in two planes.
Polar Diagram: Visualizes rotor imbalance on a polar chart for accurate placement of corrective weights.
Last Session Recovery: Allows the previous balancing session to be resumed.
Tolerance Calculator (ISO 1940): Computes permissible imbalance per ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Charts and Graphs
Overall Graphs: Shows overall vibration levels.
1x Graphs: Visualizes vibration characteristics at the primary frequency.
Harmonic Graphs: Visualizes the effects of harmonic frequencies.
Spectral Graphs: Presents the frequency spectrum for detailed examination.
Additional Capabilities
Archive: Save and access past balancing sessions.
Reports: Create comprehensive balancing reports.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
In the Box
Balanset-1A is supplied with:
A measurement unit with interface connectivity.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic mount.
Digital weighing scales.
Software (computer not included, available as an option).
Plastic carrying case.
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Description:
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Description of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel tool created for balancing and vibration analysis of rotating machinery. It excels in balancing rotors such as crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and more.
Main Functions and Features
Vibration Measurement Mode
Tachometer: Exact measurement of rotational speed (RPM).
Phase: Identifies the phase angle of vibration signals for accurate analysis.
1x Vibration: Analyzes and measures the primary frequency component.
FFT Spectrum: Thorough analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitors overall vibration levels.
Measurement Log: Keeps a record of data for further analysis.
Balance Mode
Single-Plane Balancing: Adjusts rotors in a single plane to reduce vibration.
Two-Plane Balancing: Dynamic adjustment of rotors in two planes.
Polar Diagram: Visualizes rotor imbalance on a polar chart for accurate placement of corrective weights.
Last Session Recovery: Allows the previous balancing session to be resumed.
Tolerance Calculator (ISO 1940): Computes permissible imbalance per ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Charts and Graphs
Overall Graphs: Shows overall vibration levels.
1x Graphs: Visualizes vibration characteristics at the primary frequency.
Harmonic Graphs: Visualizes the effects of harmonic frequencies.
Spectral Graphs: Presents the frequency spectrum for detailed examination.
Additional Capabilities
Archive: Save and access past balancing sessions.
Reports: Create comprehensive balancing reports.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
In the Box
Balanset-1A is supplied with:
A measurement unit with interface connectivity.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic mount.
Digital weighing scales.
Software (computer not included, available as an option).
Plastic carrying case.
Price: €2399
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
